Antweight robots are miniature versions of the Robot Wars radio controlled combat robots and appeared in Robot Wars Extreme 1 and 2. They weigh 150gms or less and fit completely within a 4 inch cube. They can be constructed of any materials. Combat is carried out in an arena approximatly 36 inches square with drop of sides on at least 50% of the arena perimeter. A polycarbonate protective cover must be used whenever spinner robots fight. A battle is lost once a robot has left the arena or if it has been disabled for 10 seconds.
Antweight Robots















 
     Antweight Forum                                                  Antweight Rules                                                           Antweight Results





       


Termite Cluster

      

Drive 4 x 10mm motor 30:1 gearboxes
Wheels 3D printed with moulded rubber tracks / tyres
Weapons 130gms + 20gm Invertible Push Bot
Power 8.4 V 180mah 25C Lithium Polymer
Chassis 3D Printed in purple / red ABS
Armour  Polycarb Scoops either end





Tarantula

Mutant
Militant
 

       
       
       








Drive 2 x 10mm motor  30:1 gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Horizontal Ring Spinner Titanium Blades
Power 12.6V 250mah 15C Lithium Polymer
Chassis CNC'd 3.2mm Fibreglass
Armour Non







Drive 2 x 10mm motor  100:1 gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Elastic Powered Flipper
Power  8.4V 250mah 15C Lithium Polymer
Chassis 3D moulded in red ABS
Armour Polycarb Flipper









































Drive 2 x 10mm motor  30:1 gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Grabber / Lifter
Power 8.4 V 180mah 25C Lithium Polymer
Chassis 3D Printed in red ABS
Armour Polycarb








Flippant
Drive 2 x 10mm motor  30:1 gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Elastic Powered Flipper Reset by Servo
Power 8.4 V 250mah 15C Lithium Polymer
Chassis 3D Printed in red ABS
Armour 1.5mm Aluminium Lifting Scoop




Anticylone

 Main Page
                                                                                                                  
        


Drive 2 x 10mm motor  30:1 gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Horizontal Titanium Spinner
Power 12.6 V 180mah 25C Lithium Polymer
Chassis 3D Printed in white ABS
Armour 1mm Polycarbonate